USD: 4,0938  EURO: 4,3999 Basket     
 
  Menu
 
 
  Product search
 
 
 
Wireless antennas
380 - 430 MHz antennas (UHF TETRA)
440 - 480 MHz antennas (UHF TETRA)
450 MHz antennas (CDMA)
800 MHz antennas
800 MHz LTE antennas
900 MHz antennas (GSM)
1800 MHz antennas
1800 MHz LTE antennas
1900 - 2160 MHz antennas (UMTS)
  1920 - 2170 MHz LTE antennas
UMTS antennas with pigtails
2.1 - 2.35 GHz antennas
2.4 GHz antennas
2.4 GHz MIMO antennas
2.5 - 2.7 GHz antennas
2.6 GHz (2600 MHz) LTE antennas
2.7 - 2.9 GHz antennas
2.9 - 3.2 GHz antennas
3.3 GHz - 3.8 GHz antennas
3.7 GHz antennas (WiMAX)
5.x GHz antennas
5.x GHz MIMO antennas
5.x GHz MIMO 3x3 antennas
6 GHz antennas
10 GHz MIMO antennas
Precise mountings
WLAN accessories
Coaxial connectors
Adaptors
UMTS/GSM modem adaptors
Tools
Holders and mounts
Stainless steel ties
Stainless steel ties - Tools
Nut cups stainless steel
Installation boxes
Power adapters
Cables
Patchcords (indoor)
PE outdoor patchcords
2.4 GHz pigtails
5 GHz pigtails
UMTS pigtails (antenna N - modem)
UMTS pigtails (antenna TNC - modem)
UTP/FTP Cables
Coaxial cables 50 Ohm
Emergency Power Supplies
LiFePO4 Batteries
Uninterruptible Power Supplies
 
  News
 
 
#21600#21125
 
  Partners
 
 
  Bulletin
 
Enter your email to subscribe our newsletter:
 
 
 Bestpartner » Catalog » PANEL XP 2 x 18 dBi antenna 1920 - 2... Previous
 

PANEL XP 2 x 18 dBi antenna 1920 - 2170 MHz LTE

Untitled Document

             This antenna is designed to be used in places where LTE signal level is to low and doesn't allow correct voice and data transmission through the modem. LTE antenna PANEL XP allows to significantly strengthen the radio signal used to implement the transmission of MIMO LTE 5G. Use of the antenna connected to the modem, can significantly increase the speed of transmission by increasing the signal level, and changes to its modulation. The antenna was made using microstripes technology and from the very best materials and is fully weatherproof (humidity, wind, UV). The PANEL XP antenna has an advanced mounting system, which allows easy azimuth and horizont correction.

Notice! In cooperation with networks of LTE antenna polarization should be set obliquely -45 and + 45 at the same time. Information on the current polarity is located on the label at the back of the antenna. The antenna must be set according to the label.

Check also : UMTS pigtails antenna - modem



Technical specification:

Model BP-2000PL-18
Gain 18 dBi
Frequency 1920 - 2170 MHz
Vertical beam width 20 degrees
Horizontal beam width 20 degrees
Impedance 50 Ohm
Connector 2 x N(f) socket
(optionally 2 x 4.3-10 (f) socket)
VSWR 1.35
Dimensions 510 / 510 / 38,1 mm
Weight 3.52 kg
Polarization vertical, horizontal (both), diagonal -45/+45 degrees (both)
Standards Full compatibility with LTE MIMO
Mounting Mast handle, diameter from 1/2 to 7/4 inch (allows full rotation and azimuth correction).
Wind load frontal: 455 N (at 125 mph)
rearside: 416 N (at 125 mph)
lateral: 21 N (at 125 mph)
Radiation patterns:
Azimuth H Elevation H
Azimuth V Elevation V



 
Price: 636.00 PLN / pcs  Price: 144.55 € / pcs    Add to the basket.
 

#21520   PANEL MAX 2 x 15 dBi antenna 1920 - 2170 MHz LTE89.09 EUR
#21538   PANEL MIDI 2 x 11 dBi antenna 1920 - 2170 MHz LTE22.50 EUR
#21532   PANEL XP 2 x 18 dBi antenna 1920 - 2170 MHz LTE144.55 EUR
 
© BESTPARTNER 2005-2014 All rights reserved