Technical specifications |
Sensitivity |
0,05 - 0,2 db/m |
Features |
Installation |
On the bottom there are mounting holes for fastening smoke sensor to the surface by 4.8×20mm screws or/and bracket and M4 screws. |
Connection |
Detector's jack RJ-12 is connected to an analog input of any system unit using patch-cable RJ-12. Determination of the sensor's type and connection occur automatically. The monitoring system allows to connect several smoke detectors into a linear circuit. For this purpose each detector has two jacks RJ-12 input and output. The first is connected to an analog input of the system unit using a patch-cable RJ-12,
the consequent is connected via patch-cable RJ-12 to an output of the first detector and so on. as one sensor with one address. |
Supply includes |
Detector,
4-wired cable RJ11 (2m),
2 screws and 2 nuts M4,
2 screws 4.8×20mm,
bracket,
double sided sticker. |
Net weight |
220g |
Dimensions (LHW) |
Ø100×45 |