Water detection cable sensor Sky Control SC591

On the bottom there is a ledge with Ø 4.5 mm and height 1 mm; and a mounting hole in

50 mm from it for fastening sensor by screw 4.8×16mm. 2-pin terminal strip type TBW-5-2p with mounted water detection cable is plugged into sensor’s connector.

Connector RJ11 is connected to an analog input of any system unit. Determination of

sensor’s type and connection occur automatically. The other end of the sensor connects 2-wire water detection cable with the plug.

sensor,
cable,
terminal strip type TBW-5-2p,
screw 4.8×16mm,
double sided sticker

Technical specifications

25g

60×18×18mm